Home > News > Content
Cast Iron Furnace Has A Strong Security
Nov 02, 2017

Now in the heating industry should be said that the cast iron furnace is widely used, we know that no matter the district, school or factory many need to use the heating equipment, mainly used to provide heating and living to meet the needs of hot water. With the extensive use of cast iron stove, and therefore there will be a unique advantage.

1 First, we know the external advantages of the cast iron stove. Long life, in general, the average life expectancy of about 40 years. Under normal circumstances, many places in the use of the boiler, then, Cast Iron Stove will prepare a backup, but if the use of cast iron furnace, then do not have to worry about this problem, because it can be said that quite a few failures.

2 Second, the use of cast iron furnace, then, relatively speaking, very energy efficient, because we know that long-term use, of course, hope that can be less trouble, and can save energy, Cast Iron Stove so you can save a large part of the expenses, and we know the cast iron furnace Can meet this effect. Faroo industrial boilers, Italian design research and development, the world's leading brands, covering the whole industry chain of hot water industry.

3 Finally, the cast iron furnace is suitable in any environment, because for many manufacturers, different places using the boiler environment is different, but for the cast iron furnace in any environment are applicable, but also for the installation is relatively simple , Cast Iron Stove And the most important is the area is very small, with a strong security, is the first choice for many manufacturers, of course, for manufacturers, Cast Iron Stove if you want to buy cast iron furnace, then the best choice cost is relatively high, more quality The protection of the production of cast iron furnace, quality and after-sales service are guaranteed. Of course, if the purchase of cast iron furnace, but also pay attention to the choice of brand, but also the truth.

The maintenance of the cast iron furnace should proceed from the management of the cast iron furnace

Cast iron furnace units to establish a tightly coordinated scientific work management system. Improve the rules and regulations, the staff should be clearly and coordination of responsibilities. Cast Iron Stove For the boiler maintenance may be on the issue, not to "check", but to take "preventive" measures, the defects and problems, eliminated in the bud. If you want to form such a perfect work management system, Cast Iron Stove it is necessary to establish a boiler maintenance control point, which is a direct impact on the boiler maintenance effect of the key factors or key to constitute the iron furnace maintenance system is an important part. Cast Iron Stove Management supply for the management of the problems arising from the necessary administrative and technical management to ensure that maintenance work can be carried out in a coordinated manner to achieve the prevention of corrosion of cast iron furnace to improve the safety of the purpose of the boiler. Management work can be the following points to start:

1. To strengthen the training of quality training

To the Secretary of the technical skills and operational skills of regular training, to strengthen the division of workers ideological education, the Secretary of the work of the workers and their economic efficiency of the organic combination of their full complement the enthusiasm of their work and establish a sense of responsibility.

2. Cast iron furnace after the shutdown, Cast Iron Stove should be completely cleared of dirt, the tail heating surface, should strengthen the management of clean, should strictly abide by the "steam boiler safety technical supervision procedures" "hot water boiler safety technical supervision procedures" and other relevant provisions.

3. Strengthen the iron furnace after the maintenance of supervision work, Cast Iron Stove which requires managers to have love and dedication of the sense of responsibility.

Cast iron furnace shutdown maintenance methods:

At present, the use of iron furnace units commonly used maintenance methods are: dry maintenance and wet maintenance. During the shutdown of the boiler, the corrosion is mainly caused by oxidation. The presence of oxidative corrosion is oxygen and water. The use of units for the boiler in order to facilitate the general use of dry maintenance and wet maintenance.

The purpose of dry maintenance is to isolate the outside water or steam into the boiler to ensure that the furnace dry, so as to achieve the elimination of boiler corrosion of water conditions.

The specific operation is as follows:

(1) maintenance must be cleared before the boiler scale and the heating surface of the soot, dry metal moisture.

(2) for long-term suspension of the boiler, Cast Iron Stove the boiler room but also rain. Moisture. Also brushing the boiler in the furnace antirust paint, red dumplings in the furnace, Cast Iron Stove but also the auxiliary equipment clean.

(3) In addition to the cast iron furnace, set the container to place desiccant, but also in the furnace. Flue and other places to place desiccant.

(4) 1-2 kg per cubic space of anhydrous green calcium or 2 --- 3 kg of lime

(5) turn off all the holes in the boiler.

(6) desiccant should be checked once every month, if found to be immediate replacement of desiccant failure.

Related News